What happens on boiler installation day

A like-for-like swap takes one day, usually 6 to 8 hours. Moving the boiler, or converting a tank-and-cylinder system to a combi, takes two.

Free, no obligation. One registered engineer prices it, not five.

Morning

  • The installer turns off the gas, water and electrics to the boiler.
  • The system is drained down and the old boiler comes off the wall.
  • Any parts that need to go, like old tanks or a cylinder, are taken out.

Middle of the day

  • The new boiler's bracket and flue go in.
  • Gas, water, heating and condensate pipes are connected.
  • A magnetic filter goes on the return pipe under the boiler.

Afternoon

  • The system is filled, flushed and dosed with inhibitor.
  • The gas pipework is pressure-tested for leaks.
  • The boiler is fired up and the flue gases are read with an analyser.
  • Controls are set up, you're shown how they work, and you get the RGI's Cert 2.

Before the day

  • Clear the space around the boiler and the route to it.
  • Find the make and model of the old boiler.
  • Plan for no heating or hot water for the day.
A heating engineer in gloves working on a wall-hung boiler with its front off

Get a price for your boiler installation

Three taps about the job. One Registered Gas Installer who covers your area rings you with a fixed price.

What's the installation?

Pick the closest. The installer asks about the rest.

Questions

Will I have heating that night?

For a like-for-like swap, yes. For a two-day job, the heating is usually back on the second evening.

Does the installer need to get into every room?

Into the rooms with radiators, to bleed and check them, and the attic if tanks are coming out.

What paperwork should I get?

The RGI's Declaration of Conformance (Cert 2), the commissioning record and the boiler's warranty details. Register the warranty with the maker.

Every guide, calculator and county page

Jump straight to any specification guide, our interactive calculator, the technical glossary or your county page.

Get a price for a boiler installation in Dublin

One registered engineer rings you. Free, no obligation.